|
|
|
#1
07-24-2021, 10:36 PM
|
||||
|
||||
|
SR3000 Became Blurry Suddenly
I have had my SR3000 Sears B&W television for about 3 years now, and it has never been blurry, until about a month ago. I didn't think anything of it, maybe just a small fluke, but it hasn't cleared up. Is there any reason for this? I have pictures attached, it may not look blurry, but it is in person, and it was never like this before. Let me know thanks.
|
|
#2
07-24-2021, 11:08 PM
|
||||
|
||||
|
There may be a hole in the back of you may have to remove the back, but there should be a focus adjustment, likely on the flyback.
Hopefully the adjustment has drifted. If it's an electrical issue someone else will have to help you as I usually don't work on sets that new.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
|
|
#3
07-25-2021, 09:32 AM
|
||||
|
||||
|
If it gets better as it warms up its usually the CRT.
Odds are it does not have a focus control. You can pull the back & see if the HV transformer has any cracks in it also. But odds are bad CRT. 73 Zeno  LFOD !
|
 |
|
|
Linear Mode
