TV Zenith Solid-state 70's

[Findm-Keepm]

Zenith CM-120 service data has your set. I have the training module from 1971.

CM-series manuals show up on ebay all the time. I don't have one, nor do I see one eBay right now.

Cheers,

[Marco-nix]

Originally Posted by Findm-Keepm

Zenith CM-120 service data has your set. I have the training module from 1971.

CM-series manuals show up on ebay all the time. I don't have one, nor do I see one eBay right now.

Cheers,

I would like to have it if have it in pdf lease i thank you.

[Findm-Keepm]

Originally Posted by Marco-nix

I would like to have it if have it in pdf lease i thank you.

It's paper, and my only one. 87 pages, not an easy scan. Lots of good info, I'll see what I can do.

Cheers,

[Marco-nix]

Originally Posted by Findm-Keepm

It's paper, and my only one. 87 pages, not an easy scan. Lots of good info, I'll see what I can do.
Cheers,

Thank you for the comment.. However I only need the schematic for the complete circuit. I'm sure I'm not learning you anything but mine is metal. . Anyway. do your best

[rca2000]

Sams is # 1266...

[zeno]

I pulled the manual on this set. When you open it
look on the side of the flyback transformer. There are 2
capacitors marked 22-5001 .0018 1.6 KV.
( D & E chassii have more).
If they are white you must change them. If they are
orange they are OK to use.
The HV tripler should be examined for cracks.
The focus divider is the "rocket ship" style & rarely gave
trouble in Zeniths.
I will keep the manual handy if you have other questions

au revoir Zeno

[rca2000]

Originally Posted by zeno

I pulled the manual on this set. When you open it
look on the side of the flyback transformer. There are 2
capacitors marked 22-5001 .0018 1.6 KV.
( D & E chassii have more).
If they are white you must change them. If they are
orange they are OK to use.
The HV tripler should be examined for cracks.
The focus divider is the "rocket ship" style & rarely gave
trouble in Zeniths.
I will keep the manual handy if you have other questions

au revoir Zeno

Look again....accd. to the sams....the "rocket ship" is JUST a 200 meg. HV Bleeder. only connections are to the anode and ground. Focus comes off the tripler--and through a couple of high-value resistors on the focus board.

[Marco-nix]

Originally Posted by zeno

I pulled the manual on this set. When you open it
look on the side of the flyback transformer. There are 2
capacitors marked 22-5001 .0018 1.6 KV.
( D & E chassii have more).
If they are white you must change them. If they are
orange they are OK to use.
The HV tripler should be examined for cracks.
The focus divider is the "rocket ship" style & rarely gave
trouble in Zeniths.
I will keep the manual handy if you have other questions

au revoir Zeno

Merci.. I will check later because I have lot of things to do. I moved and I have to replace many things..And if you can speak french, I prefer

PS: If i clic 'ON " i can see the picture but not complete. the sound is great and I do not hear crackling from inside the cabinet and the flyback .. There are no tubes either on the frame.

In french : Je vois les trois quarts de l'image dans l'écran mais les têtes des personnages sont difformes et sont penchés vers la droite..