Quote:
Originally Posted by zeno
Rapid progress ! Nice work. You cant beat these sets to
learn & experiment with.
If the color is lined up properly you should be able
to change channels WITHOUT the color coming on with
color bars before locking in. If it dont deal with it later.
Next is the minor width problem. Be SHURE you are actually
turning the HV reg control, see if it goes from stop to stop.
Most had an odd adjustment that you had to jam a tool in to
get it to move, not just the usual screwdriver adjustment.
HV controls with a bad spot give exactly the minor width
problem.
The filter can is a quick test but the sides are strait so I think
thats OK. After that scare up some KNOWN good ( not tube tested )
tubes. When the width is fixed its time for a complete
CRT set up.
73 Zeno
|
Well, there is a slot in the HV reg control and I can see it turning and I hear HV changing in the TV while I do it. Now I don't want to overdrive the TV as I don't have an HV probe, but I rocked it 1/8 to 1/4 turn (cc and ccw) just to see if it does something and it didn't.
As for the tubes, I should get an 6LF6 and the 3 others as well?