#1
|
||||
|
||||
Wavetek 1002
Here's another recent acquisition -a Wavetek 1002 0-500 MHz sweep generator. Amazingly, it seems to work just fine. I can't remember the last time that happened! It's also built like a tank.
I'm not quite sure how the markers are supposed to work. The buttons are marked 1, 10 50 Har I suppose I better read the manual. Very nice, stable output Unfortunately, it didn't come with any probes. The RF output seems to be some sort of threaded BNC connector Maybe it's a TNC ? http://en.wikipedia.org/wiki/TNC_connector As soon as I get the probes and markers sorted out, I'm going to try aligning an Admiral set I have up on the workbench. Last edited by bandersen; 07-17-2010 at 10:32 PM. |
#2
|
||||
|
||||
[offtopic]
On your scope there, push the "print/utility" button then quickly press and hold the second and third function buttons along the bottom of the screen. [/offtopic] |
#3
|
||||
|
||||
Oh yeah, the old Tetris easter egg I can't get it work on mine for some reason. Maybe I have a different version of firmware or my timing is just bad. Probably the latter!
|
|
|