|
#1
|
||||
|
||||
I have a plastic cabinet tabletop 19DC12 and my focus pot is in the "vert centering" apron hole as well. I thought it was an upgrade mod.
I also had a 19DC11 set that was otherwise identical and had the divider resistor like Tom's earlier set. The focus control was mounted on a fiberglass board at the fly and the control had a long shaft that stuck out the back. As I recall, the focus was better on the 19DC11 but I gave it to Bryan Gadow in one our frequent set-swaps.
__________________
"When resistors increase in value, they're worthless" -Dave G |
#2
|
||||
|
||||
Quote:
The caps were pulled & a tripler kit subbed. The original tripler was a weird looking thing like a ladder & was red. Not too many came that way. There were a lot of varieties in the hybrids HV. I only did one FBT on one & it was a big kit & included a tripler IIRC. 73 Zeno |
#3
|
|||
|
|||
Quote:
|
|
|