#16
|
||||
|
||||
o
Quote:
jr Last edited by jr_tech; 04-16-2024 at 02:41 PM. |
#17
|
||||
|
||||
As I mentioned earlier there was a wood cabinet version of this as well as a leatherette portable so there were 7" halicrafters with this chassis and control layout that had a decent WAF compared to the ham shack model.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
#18
|
||||
|
||||
Quote:
|
#19
|
||||
|
||||
#20
|
||||
|
||||
Quote:
If I can someday find any of the late-1940s experimenter-grade video cameras or components, I could have a matching HF/ATV station set up.
__________________
Chris Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did." |
Audiokarma |
#21
|
||||
|
||||
I restored two of those a few years ago. $10 for the pair at the ETF silent auction. One was a Delco badged wood one. One had the octal tubes, the other miniature, in the IF.
I do not consider them at all odd except the pushbuttons, which are a pain to get working properly, but in the end work well. Many sets have similar IFs. I've never got one of those to align using instructions. I've succeeded (using a bias box) with sweep or, better, white noise and my Airspy SDR as spectrum analyzer. One can get reliability of the CRT voltage by installing a fan. I used a 240 volt AC fan running on 120 VAC ,,,, very quiet. Nice sets, good picture. I kept the metal case one (it sits next to my SX-88) and gave the wood one (unrestored case) to the ETF to put the chassis in their nice case. Last edited by dtvmcdonald; 04-21-2024 at 07:00 PM. |
|
|