Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-29-2024, 08:19 AM
DavGoodlin's Avatar
DavGoodlin DavGoodlin is offline
Motorola Minion
 
Join Date: Aug 2011
Location: near Strasburg PA
Posts: 3,413
Zenith 25LC20 - the Hinsdale

After working on lots of other things including RCA's delicate, fussy and over-driven horizontal output and high voltage stages, I handily restored this Zenith. Last one I did was 24NC31Z, issues a bit more involved but still very responsive.

I picked this up at Kutztown last May from another collector and tried in vain to get it working at the show. I brought it back last September hoping to flip it as a good project and actually had a young collector interested. He was leery of working on HV so I promised to fix THAT part and bring it back.

Meanwhile, certain that both the original 21FBP22 was good and flyback checked out and, this would NOT be like and RCA but have a few very obvious issues that are easy to deal with. I was not wrong I suspect that this TV (originally from NJ) followed this failure script thus " 6HF5 horizontal output tube burns vertical yoke lead which may have been dressed too close to the HOT's plate cap" Testing three multi-section electrolytics, I found one drippling black stuff and another that all four sections were open! New caps soldered right in without crowding, doubler cap was good and so was two sections of another, both Mallory OEM.

Having just one NIB 6HF5 (saved for my other Zenith 21" color SC400) and the bad one that was in the TV when I got it. I had a half-dozen 6JS6, so I added components and rewired the HOT socket to use a 6JS6 just like a 25MC30 and later sets. It didn't take much and HV was back at 24 kV and just 170 mA via the cathode of HOT. Never have I ever gotten an RCA down to numbers like that so easily.

Issues that remain, possibly for the next owner, are a bit of raster size changes based on scene brightness, taped convergence color sync may be touchy and hue changes. The convergence cloverleaf needs something better and that is evident in the picture. But that brightness and contrast sure promise a better picture is possible. Sound is unusually good for such a skinny oval speaker.
Zenith 25LC20 -1964 Hinsdale red.jpg
__________________
"When resistors increase in value, they're worthless"
-Dave G

Last edited by DavGoodlin; 04-29-2024 at 08:24 AM.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:18 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.