#11
|
||||
|
||||
With the probe in the 10x mode it would be 10 volt / div. Isn't that how it works? If I set the scope to 1 volts/div and put the probe in 10x mode, it would reduce/lower/attenuate it by a factor of 10 and the display should be read as 10 volt/div?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
|
|