|
#1
|
||||
|
||||
How do you get such a nice clean cut when opening the caps? Lathe??
jr |
#2
|
|||
|
|||
I use a band saw then true up the parting surfaces with my disc sander.
|
#3
|
|||
|
|||
Just a fun fact. Here is a picture of all the resistors and capacitors I intend to replace during this restoration. $ E-Caps are missing from the photo. They are in a re-stuffed C2. All of the replacement resistors are the next step up in wattage. The 1/2W get 1W, the 1W gets 2W, the 2W gets 3W, the 4W gets 7W, and so on. The main chassis Candohm (R109) resistor is listed as a 15K 10W and will be replaced with a 15K 50W chassis mount resistor.
Last edited by Crist Rigott; 11-07-2017 at 07:24 PM. |
|
|