|
#1
|
|||
|
|||
9/16" CRT specs wanted
Hey folks, long time no see! On a lark, to waste time, I took apart a dead camcorder to salvage the viewfinder CRT. M01KKX07WB03 Panasonic. But my search on Google nets only that it cost $81 and is out of stock. I am looking for at least the pinout and fil volts, both of which I can guess at but don't want to pop the fil. Any ideas where I can find that info? Thanks!
__________________
Marlin H. Mackley www.studio4-17.com |
#2
|
||||
|
||||
What is the model number of the camcorder that you took apart?
|
#3
|
|||
|
|||
Panasonic Palmcorder AFx8
__________________
Marlin H. Mackley www.studio4-17.com |
#4
|
||||
|
||||
That doesn't come up as a valid model number - it is a feature listed on several models of Panasonic camcorders.
|
#5
|
|||
|
|||
When I put it into Google it did, but all I found were Ebay sales of these, no service info I could use.
__________________
Marlin H. Mackley www.studio4-17.com |
Audiokarma |
#6
|
||||
|
||||
If you still have all of the parts, the actual model number will be on a plate on the bottom of the camcorder - it is on the same plate as the serial number and electrical specs.
I am trying to find a service manual for you, but I need an actual model number. |
#7
|
|||
|
|||
Sorry, but from extreme handling the numbers on the metal base tag are all gone. It is just a badly scratched shiny surface.
__________________
Marlin H. Mackley www.studio4-17.com |
#8
|
|||
|
|||
Quote:
mount: PV-310
__________________
Marlin H. Mackley www.studio4-17.com |
#9
|
||||
|
||||
Marlin may not remember it, but HE was the one who introduced me to AK long, long time ago...Glad t'see ya back ! Stay & visit w/us !
__________________
Benevolent Despot |
#10
|
|||
|
|||
Hi Sandy!
__________________
Marlin H. Mackley www.studio4-17.com |
Audiokarma |
#11
|
||||
|
||||
This CRT is used in a PV-31 and a PV-41, but I can't find a service manual for them. The cameras were manufactured in 1992. Maybe someone else has a copy.
|
#12
|
|||
|
|||
Thanks for trying! From your general knowledge is it likely the filament is the 6v the canmcorder ran on, or some reduced amount? I can just about tell what the pinout is using a jeweler's loupe and the ohmmeter.
__________________
Marlin H. Mackley www.studio4-17.com |
#13
|
||||
|
||||
Here is a schematic from a similar viewfinder - maybe it will help you do what you want to do.
|
#14
|
|||
|
|||
Great, thanks!
__________________
Marlin H. Mackley www.studio4-17.com |
#15
|
||||
|
||||
Most likely PV-31D
|
Audiokarma |
|
|