|
#1
|
||||
|
||||
The WORST ever
Let's have a hall of shame for the worst color sets ever made. In my book the Motorola with the 23EGP22 wins, hands down... unbilievable junk. Nothing else even comes close. Helped me pay a lot of bills, though.
|
#2
|
||||
|
||||
I would say the late 60's GE color sets. The color reproduction was never good on them. Either the fleshtones were green or purple and no way to really get them right. The grass was always green and sky was always blue but the fleshtones sucked. They always had HV and focus troubles of some sort. Dont forget the high pitch noise they always had comming from the flybacks. I could hear a GE flyback a hundred feet away. They had the capability to make a nice quality set but chose not to. I guess thats why you dont see many of them surviving to now. The one that Dwight just got was the first one i have seen in at least 15 years.
-Tony |
#3
|
||||
|
||||
I say Sony's first 26" set-- with the 710ab22 picture tube
They never lasted very long, and you could NOT rejuv them-- they would fade back down right befiore your eyes.(i'm referring to the big sony tube"26", with the DUAL anode coaxial connector, for hv, and convergence)
|
#4
|
||||
|
||||
Zenith CRT's around 1993! Really bad CRT's. I have a 1969 GE color set...got the chassis working but CRT is shorted!
There is also CTC-177 but I think that once the solder joints are repaired they are OK. Last edited by Chad Hauris; 09-02-2004 at 06:17 AM. |
#5
|
||||
|
||||
Quote:
Were these CRT's made by Rauland? |
Audiokarma |
#6
|
||||
|
||||
No, it has to be that godawful POS Sears set from the early '60s. AS I've said, sometimes the thing would take a dump before the repair guy got out of our driveway good. I don't know who made it, but I think it was made in Japan, & this was before they'd figured out how to make color sets very well.-Sandy G.
|
#7
|
||||
|
||||
magnavox and zenith projection tv,s looking at a zenith now on my bench.
pure shi##y crap. |
#8
|
||||
|
||||
My boss at the time absolutely HATED anything Motorola especially their color sets! He passed them on to me to try and repair.
I guess the reason I have so many now is more nostalgia than anything. I have to say that the GE tube stuff pretty much sucked though with a so-so picture and brittle pc boards after a few years. Coronado and westinghouse of the era were junk too. |
#9
|
|||
|
|||
most tube sets that weren't RCA or Zenith seemed to be pretty crappy. RCA's CTC-38 chassis was crap. It's like they decided to go "on the cheap" at the end of the tubed chassis run.
|
#10
|
|||
|
|||
GE sets from the later 1960s all seem to be pretty poor with cheap CRTs and cheap construction.
I have some Motorola B&W sets from 1965 and before. These seem ok with metal chassis ,etc. They went cheap about 1965 and the later stuff does not seem to be built well. |
Audiokarma |
#11
|
|||
|
|||
Captain Moody, Yes!!! Coronado's were terrible, but don't forget the crap you could get at your local Western Auto! (True Tone)
|
#12
|
|||
|
|||
---
Last edited by andy; 12-08-2021 at 04:18 PM. |
#13
|
||||
|
||||
Quote:
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
#14
|
|||
|
|||
Quote:
I've got a 1995 Zenith 19" Sentry 2 also. Been my main TV the entire almost 11 years now. Never had a problem with it. Been used TONS. No problems. |
#15
|
||||
|
||||
Quote:
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
Audiokarma |
|
|