#1
|
|||
|
|||
1991 Zenith Console Telvision Horizontal
I need some advice on if and how you can go about adjusting the Horizontal on a 1991 Zenith Console TV. My Zenith Doesn't have the Adjustment on the back near the bottom of the TV like my RCA TV does.
I believe my horizontal on the TV currently is a little out of Adjustment. |
#2
|
|||
|
|||
Unlikely but you might have a service menu that can be accessed. If not there might be an adjustment inside the set. However the issue might be a bad capacitor or another part in the horizontal circuit that's drifting out of spec.
|
#3
|
||||
|
||||
Quote:
http://www.videokarma.org/showthread.php?t=265964
__________________
Brian USN RET (Avionics / Cal) CET- Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
#4
|
||||
|
||||
Quote:
|
#5
|
||||
|
||||
OP hasn't visited since his original post. No model number, no help from me. Years are USELESS.
OP:Simply post the model number (or a chassis number) and help will flow.
__________________
Brian USN RET (Avionics / Cal) CET- Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
Audiokarma |
Thread Tools | |
Display Modes | |
|
|