Signal sources?

[mbates14]

Originally Posted by Electronic M

Look for a used blonder tongue AM40 series (or AM60 if you want to transmit) modulator on eBay...Some need new lytics, but they are among the best performing and can be repaired/maintained easily and kept in service indefinitely.

as "I think" I mentioned in my first post, I have one already but both overmod LED lights are stuck on and doesnt work so I need to service it somehow. I dont have the schematics so it might be a bit difficult. I believe the one I own is a AM60-450 set for Channel 43. But I need to get it between 2 through 12 somehow as all of my sets are VHF only. Plus again, repair iit.

[Electronic M]

Originally Posted by mbates14

as "I think" I mentioned in my first post, I have one already but both overmod LED lights are stuck on and doesnt work so I need to service it somehow. I dont have the schematics so it might be a bit difficult. I believe the one I own is a AM60-450 set for Channel 43. But I need to get it between 2 through 12 somehow as all of my sets are VHF only. Plus again, repair iit.

Just change the lytics, the values are printed right on each part so no need for a schematic(just remember/mark polarity of original relative to board).

Most have a settings card built into the front cover for what dip switch setting for what channel. It can also be found online.