|
#1
|
||||
|
||||
You may be able to get them from B&K; but, the last time I checked, B&K was very proud of their test sockets. Otherwise, they turn up on ebay. Or, you could make your own with a molex connector, an old socket from a junk set, and the pin layout for the tube you wish to test. That's what I had to do for the mid '80's and newer Sony Trinitron CRT's, since B&K does not make a dedicated socket for them. Anyway, here's a list of the ones you'll need the most for older TV's.
CR1 - test the early inline CRT, such as what RCA used, from the early-mid '70's. CR2 - roundie color CRT's CR3 - standard delta gun color CRT's that were used from the mid '60's up until around 1980. CR4 - test the 10" porta-color inline tubes of the '70's CR6 - most common socket for '60's and newer 17" and larger B&W tubes CR7 - test most 9"/12" small neck B&W tubes CR9 - I think this one test predicta CRT's. CR10 - test the older large neck B&W tubes from the '40's through early '60's. CR12 - test the early 11" porta-color inline tubes CR16 - test the early large neck inline tubes that were common in GE and Sylvania/Philco sets from the '70's and early '80's. CR20 - test the inline tubes that were used in early Zenith system 3, Magnavox, Philco, and Sylvania sets from the late '70's/early '80's. CR23 - test many inline tubes that were used in the majority of TV's and monitor's from around 1980 until the end of CRT's CR24 - test inline CRT's used in RCA sets from the late '70's to the late '80's. Also test some Curtis-Mathes inline CRT's from the same time period. CR25 - test many inline CRT's, such as what is found in late '70's to early '90's Samsung, Goldstar, Sears/Sanyo, and in the Sylvania/Magnavox/Philco E32 sets. CR31 - test the small neck inline color CRT's that were around from the mid '80's until the end of CRT TV's |
|
|