|
#1
|
||||
|
||||
Do they have no physical angle adjustment? Is that what you're asking? You might need to make a whole new mount for the red and blue, something easily adjustable. You might be able to hinge the inner side of each, and attach an adjusting screw on the outer side to lift it up or down.
|
#2
|
|||
|
|||
That is exactly what I am asking, if anyone has done this and might have some insight, was thinking exactly that, hinged on the inside, and some adjustment screws on the outside, just trying to work it out to make it happen.
|
#3
|
||||
|
||||
The way I worked around the coarse convergence was that the innermost tube was fixed to the frame while the outer two were mounted with spring loaded bolts on the outside edges and two threaded adjustment knobs on the inside edges. Another two knobs would tilt the frame up and down on a welded-in piano hinge but I never got the keystone issue figured out. I found that for the short time that my STK convergence amplifiers were behaving it worked very well.
http://i11.photobucket.com/albums/a1...y/IMG_4525.jpg http://i11.photobucket.com/albums/a1...t/IMG_5247.jpg http://i11.photobucket.com/albums/a1...t/IMG_5277.jpg Last edited by MIPS; 07-03-2018 at 07:44 PM. |
|
|