Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-16-2017, 11:42 AM
DavGoodlin's Avatar
DavGoodlin DavGoodlin is offline
Motorola Minion
 
Join Date: Aug 2011
Location: near Strasburg PA
Posts: 3,400
Remove shorts using B&K 445

Does the ""REMOVE SHORTS"" function blast only grid to cathode shorts? Or does it tie heater and grid together and blast a short on BOTH sides of the cathode?

I have a very strong 21FJP22 RCA colorama replacement and it has a heater-cathode (H-K) short on the blue gun only. Using an ohmmeter between pins 13 and 14, indicates a 3.1 ohm short that goes open only when neck is gently tapped.

I plan to use a 6.3 volt 2 amp transformer for isolation if is too risky. BUT, I know from experience that this adds stray impedances to an other wise good video signal fed to the blue cathode.
__________________
"When resistors increase in value, they're worthless"
-Dave G
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:52 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.