|
#1
|
||||
|
||||
I forgot to mention I cleaned up all the contacts in there as well. The antenna cable is in great shape. Next time I have the bench space I'll tear it down and go over everything for cold joints. Ok,AGC delay control,what is it's function and how can I adjust it properly? I have experience on electronics but I'm still learning,especially on TV's.
I see a Zenith Triac replacement kit on eBay part no. 800-618. It just looks like a cable in the bag, is there something I'm not getting about the replacement? Last edited by Laserdisc; 01-19-2018 at 10:44 PM. Reason: omitted info |
#2
|
||||
|
||||
The cable plugs in series with the power wires ( black, blue, grey )
on older CC2 sets & has a VDR added. Should also have instructions & triac & IIRC hardware, mica etc. Remember I am ASSUMING the triac is the same !!!!! RF AGC with strong signal turn untill snowy. Turn back until it just clears up & leave it there. 73 Zeno LFOD ! |
|
|