#16
|
|||
|
|||
Quote:
Would you say that I should pull them up or down according to consumer preferences? Or where I think the brightness/contrast should be according to where those front controls are at the moment I am performing this? |
#17
|
||||
|
||||
Quote:
AGC is Automatic Gain control also dont touch Overall brightness on Zenith is affected by: G-2 or Screen ABL Brite range BL Depends on chassis what its uses. No need to touch them unless the pix is to brite or dark & then it is questionable..... Customer contrast or picture control & bright should be mid range. Driving it at high levels exaggerate any flaws in the CRT making it look bad. If you take a set with a very weak CRT & adjust it in a dark room at low level it usually will look good till you turn things up. A slightly weak CRT can look almost good in normal light. BTW If you post a chassis picture ( nudie ) model & chassis numbers it helps ID the set. Dont know if you have a CC2 style steel chassis or a System 3 style. All I know is its an in line EFL CRT. 73 Zeno LFOD ! |
|
|