Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #31  
Old 11-21-2018, 05:06 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,672
The transformer will be wound with heavy wire & not much so you
will get very low ohms.
Unfortunately the ZOOM doesnt blow things up enuf so I can see it.
The hoz lin & pincushion usually will be in series with the yoke. Follow the hoz
windings of the yoke from the collector of the hoz out transistor through. Watch for a yoke coupling cap in series with it. Also look for any diodes off the C of the hoz output. If any lift one end & do diode test with your meter.

Yes I did do some monitors inc NEC. I am NO expert in them. In fact I hated
monitors. I was doing piece work for a cat & told him " no more monitors ,
projos, or VCR / TV combos". All a PIA.
Keep in mind monitors were fixed BOARD LEVEL ONLY as far as a MFG goes.
Even getting a manual set you back $50 - $75. Add to that you could not
buy parts ONLY boards. If you get this going you will have something to
be very proud of.........

73 Zeno
LFOD !
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:50 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.