Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-26-2018, 10:19 AM
iong iong is offline
VideoKarma Member
 
Join Date: Apr 2014
Posts: 46
Rca ctc-53x

Just got a RCA model EX 417WR Remote control tv with CTC-53x Chassis. Uses low voltage focus crt 18VDP22. I have poor focus and not sure how to correct this. There is no focus pot however the wire leading from the focus pin of the crt has three placement positions. One pos. is 0 volts another is 310V and last is 790v. There is a resistor inside the picture tube socket and measures correctly. The 0 volts provides best focus but still out of focus. The high voltage is higher then normal about 22k. There is a strap that can be cut to make high voltage higher according to RCA service guide. Voltage 22k when strap was attached. 25k not straped. Hoping someone can help with this focus problem.
My line voltage is a little high around 123VAC.
Perry
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:27 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
ęCopyright 2012 VideoKarma.org, All rights reserved.