I'm getting a Sencore CR70

[dieseljeep]

Originally Posted by TUD1

I cleaned the CR70 as much as I could, and it actually cleaned up well. I went to Lowe's to try to find plastic feet for the bottom, and nobody had any idea what I was talking about. I tested it out, and aside from the fact that you have to change the settings for each color, I like it a lot.

Look in the closet or cabinet hardware area.
I bought, what they referred to as sliding closet door bumpers at a hardware store. They looked like rubber feet, but they were white. The screws, they included were wood screws. I used 6/32's.
BTW, my CR70 was missing a foot as well. I looked through my hardware and found one that was close in size.

[Jon A.]

Originally Posted by dieseljeep

BTW, my CR70 was missing a foot as well. I looked through my hardware and found one that was close in size.

Man, this is an epidemic! My good one was missing a foot and I think my parts unit was as well. Its case was in rough shape; bashed in on top, rusty hardware. I trashed it some time ago, keeping some parts for the good one.