Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Television Broadcast Theory

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 09-01-2016, 05:18 PM
lnx64's Avatar
lnx64 lnx64 is offline
VideoKarma Member
 
Join Date: Jan 2012
Location: New Port Richey, FL
Posts: 1,787
Well, looks like I should have checked with the ARRL first.

http://www.arrl.org/band-plan

"ATV Channel #1".

Well, looks like that solves that mystery. I just didn't know hams were using ATSC now. I thought they still used NTSC.
Reply With Quote
  #2  
Old 09-05-2016, 08:50 PM
ChrisW6ATV's Avatar
ChrisW6ATV ChrisW6ATV is offline
Another CT-100 lives!
 
Join Date: Feb 2007
Location: Hayward, Cal. USA
Posts: 3,475
Quote:
Originally Posted by lnx64 View Post
I just didn't know hams were using ATSC now. I thought they still used NTSC.
I am a long-time operator of TV over ham radio (ATV, amateur television). One of the joys of ham radio is that we are not limited to specific standards for most of our transmissions, so in the case of TV signals, hams have used NTSC (AM-mode), as well as FM-mode NTSC, and several digital modes. ATSC is pretty rare in the ATV world, partly because transmitting equipment is expensive and/or hard to obtain. Other digital modes (DVB-S, DVB-T, even QAM "digital cable" mode but put on the air) are more common.

If that 12-MHz ATSC signal was indeed an ATV station, the bandwidth was probably not intentional; it may be a type of intermodulation problem that happens in the station's amplifier(s).
__________________
Chris

Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did."
Reply With Quote
  #3  
Old 09-05-2016, 09:58 PM
lnx64's Avatar
lnx64 lnx64 is offline
VideoKarma Member
 
Join Date: Jan 2012
Location: New Port Richey, FL
Posts: 1,787
Quote:
Originally Posted by ChrisW6ATV View Post
I am a long-time operator of TV over ham radio (ATV, amateur television). One of the joys of ham radio is that we are not limited to specific standards for most of our transmissions, so in the case of TV signals, hams have used NTSC (AM-mode), as well as FM-mode NTSC, and several digital modes. ATSC is pretty rare in the ATV world, partly because transmitting equipment is expensive and/or hard to obtain. Other digital modes (DVB-S, DVB-T, even QAM "digital cable" mode but put on the air) are more common.

If that 12-MHz ATSC signal was indeed an ATV station, the bandwidth was probably not intentional; it may be a type of intermodulation problem that happens in the station's amplifier(s).
Yea the most I've done is AM mode NTSC at 70cm, because I can pick it up on any CATV ready set in CATV mode.

I actually didn't even know an FM mode existed for NTSC, now you have me more interested than ATSC, because I might be able to transmit this. *goes to research this*
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:29 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.