#1
|
||||
|
||||
Connectors for a TK-30 Power Supply and CCU
Hi All,
Does anyone have the old Cannon connectors and or cables which would connected to the TK-30 CCU and power supply. I acquired an old TK-30 camera chain a few years ago and plan to restore it. I do not have the original pulse generation equipment and plan to get by with a more recent solid state sync pulse generator which provides separate vertical, horizontal and mixed syncs. It appears I would only need to build a pulse level interface to ensure the pulses are the correct level. (Horizontal pulses are about 80 volts p-p!) All connectors originated during WWII as the Series K Cannon Connector. I require the sync input connector is an NK-7 (?) 7 pin male Cannon connector for the sync input. I also require the male and female NK-12 Cannon 12 pin connectors to intercoonect the Power Supply with the CCU. Any help securing these connectors will be greatly appreciated. Thanks, Terry Last edited by Penthode; 03-06-2011 at 11:07 PM. Reason: Spelling! |
|
|