Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-01-2011, 05:01 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
How important is this cap's value (Sony 8-301W)?

After replacing about two dozen electrolytics, my Sony 8-301W portable works great, except that I can't bring in the horizontal frequency (using frequency adjuster R4 and the horiz. hold control).

Capacitor C34 is 1mfd/12v. I couldn't find a 1-mfd electrolytic, so I used the closest I could find, a 3.3mfd/16v. Just wondering if the value of that cap is that critical?

Here's the horizontal portion of the schematic:

http://antiqueradio.org/art/temp/Son...lSchematic.jpg

I highlighted in yellow five caps that I replaced in this section, including C34.

Here's the full schematic:

http://antiqueradio.org/art/temp/Son...WSchematic.jpg

If it's important to use that value, perhaps someone could tell me where to find a 1mfd/12v electrolytic. Mouser didn't seem to have any.

If 3.3 mfd is close enough for C34, then I'll start looking for other causes.

Thanks!

Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:15 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.