|
|
|
#1
07-13-2013, 02:28 PM
|
||||
|
||||
|
Are these just holddowns
I took all the press-in modules out for a cleaning and cleaned the contacts. On each module were two blue plastic tubes on unused pins. I looked them over and they serve no electrical function, so I'm assuming they were used to keep pressure on the board to stay seated.
Do I need these? The boards seem to fit snuggly on the pins and I don't see them on my other CC2 (no problems with the boards coming loose). You can see them in the attached picture on the vertical and horizontal boards. Thanks
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 
|
|
|
Threaded Mode