|
#1
|
|||
|
|||
Here goes. If this works, these are pictures of my restored set. Merry Christmas everyone!
|
#2
|
|||
|
|||
Quote:
An important piece of color TV history and design. |
#3
|
|||
|
|||
My newest arrival, courtesy of another member here. I’ll post pics of my parts set when I’ve cleared a path to it.
|
#4
|
|||
|
|||
'That's the hi-voltage focus model, HE chassis. Probably that last of the production run. I have two of this model. I didn't change the boost filter caps in my two yet. .1 mfd @ 1000 volts. It's located on the side of the HV cage, instead of the PC board, like the earlier models.
|
#5
|
|||
|
|||
Quote:
I haven't tried my PC's in a few years. I just fired up one of my later models and it looks pretty good. AFAIC, it's still better than watching B/W. The sound is better than many of the small import solid state sets. |
Audiokarma |
#6
|
|||
|
|||
Quote:
|
#7
|
|||
|
|||
Quote:
Where in NW Indiana are you located? The tube compliment is about the same as the older models with maybe a few changes, HV rectifier etc. CRT is designated under the newer standards, 10V. IIRC, 10VABP22A. |
#8
|
||||
|
||||
I like the cabinets on the later ones. Looks like it should be solid state...lol
|
#9
|
|||
|
|||
Quote:
The CRT was similar, but with a 12v heater. All the 10/11" PortaColors only had a 70 degree sweep, so the tubes were a lot longer. |
|
|