Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 07-04-2012, 04:03 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
little sony dim picture

sorry cant ready the model number but its about 7" diagonal B&W rotary tuners guessing late 70's.

Pic brightness all the way up, get a barely decent pic completely cuts off at anything less than about 1/4 turn on the brightness.

Beside a weak CRT (which I have not checked yet) I assume I will need to check CRT voltages for bias settings. Anything else come to mind?

Last edited by DaveWM; 07-04-2012 at 04:12 PM.
Reply With Quote
  #2  
Old 07-04-2012, 05:12 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,018
Check the CRT and CRT voltages. The CRT voltages need to be very close to what's on the schematic or you may have problems.
Reply With Quote
  #3  
Old 07-04-2012, 06:34 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
here is it, the model number tag is rubbed clean
Attached Images
File Type: jpg screen pics.jpg (51.0 KB, 48 views)
Reply With Quote
  #4  
Old 07-04-2012, 07:26 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
There's a Sony 5.5" CRT on eBay now, don't know if it's correct for your set or not.

http://www.ebay.com/itm/Vintage-Sony...item4d02a9ab4a

And a 9"
http://www.ebay.com/itm/SONY-9-CRT-U...item2c51fcb951

Whoops, I see you said it's about 7", well I'll keep looking.
Reply With Quote
  #5  
Old 07-04-2012, 09:16 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
http://www.ebay.com/itm/Rare-Vintage...item35bc5f55a0

here is is for sale, interesting the CRT looks about as bright as mine.
Reply With Quote
Audiokarma
  #6  
Old 07-04-2012, 09:17 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
I can't even see how to take the darn thing apart to check the CRT...
Reply With Quote
  #7  
Old 07-05-2012, 09:31 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
model TV-770
Reply With Quote
  #8  
Old 07-05-2012, 08:25 PM
ctc17 ctc17 is offline
VideoKarma Member
 
Join Date: Jul 2009
Posts: 1,615
Im going to email you the sams on it, its going to blow your mind
The filament IS the cathode and it uses a little isolation transformer that looks like it may apply the horz/vert blanking too.
I see a 1uf boost filter cap that could cause low boost/low G2

It is a unique design thats for sure. There are disassembly instructions in here.
Reply With Quote
  #9  
Old 07-05-2012, 09:11 PM
ctc17 ctc17 is offline
VideoKarma Member
 
Join Date: Jul 2009
Posts: 1,615
Just to note so everyone doesnt think were too crazy here....the crt is kinda like a 5U4, The filament is the cathode so they use an isolation transformer much like you would to save a crt with a heater to cathode short. The isolation transformer is driven by the flyback.

I have a feeling this is one of those deals where they crt never goes bad or is always the problem. No way to test it.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:29 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.