Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Expeditions & Passions

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-28-2016, 11:15 PM
MIPS's Avatar
MIPS MIPS is offline
VideoKarma Member
 
Join Date: Jun 2014
Location: West Canadia
Posts: 385
Vending Machines

I've unintentionally doscovered there are people out there who collect vending machines while I was deciding that I should buy a beer fridge.





So far it has cleaned up nicely with a pressure wash but it's still got a way to go. The coin acceptor is missing. A bearing on vend column 4 is really stiff, the white opaque paint on the sign has turned to powder and fallen off, the columns literally only dispense half the time because they aren't fully setup right, someone has swiped the bottle opener and ignoring the large number of dents and scratches someone has taken the column shims. I discovered while refilling it that these shims change the width of each column. If they are too wide some cans like to jam up against eachother and regular plastic soda bottles are too large. Also is there something special about 7Up cans? Everything else I've put in the machine so far has dispensed somewhat reliably but 7Up either kept jamming or rupturing and making a sticky mess everywhere.

Also is there a source for new button labels or even a template? I need to make some new ones for the beer I've added.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:51 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
ęCopyright 2012 VideoKarma.org, All rights reserved.