Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique phonographs

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-14-2017, 01:05 PM
Timm Timm is offline
VideoKarma Member
 
Join Date: Feb 2017
Posts: 2
Metz babyphon 101 Question

I am getting a Metz babyphon which needs work and I was wondering how to lubricate turn controls like volume knob etc. If I use pb blaster I am afraid it would leave a lingering smell and also what cartridge does it require thank you.
Reply With Quote
  #2  
Old 02-15-2017, 12:11 AM
MadMan's Avatar
MadMan MadMan is offline
Professional MadMan
 
Join Date: Oct 2016
Location: Chicago
Posts: 166
Well I don't know the house's recommendation around here, but PB blaster is far too thin. It'll run right off after a couple days. Unless the controls are frozen, I wouldn't use it. Personally, I prefer white lithium grease in aerosol cans. Either Liquid Wrench or WD brand, all the others I've tried suck. It has good adhesion and lubricates nicely.
Reply With Quote
  #3  
Old 02-15-2017, 06:39 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory+Moderator
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 8,148
PB blaster is not really a control cleaner...If the shaft is stuck it's good at freeing it. The best control cleaner is Deoxit, but it is also stupid expensive. De-Ox-ID I've found to be roughly equivalent in performance but much cheaper. WD-40 works in a pinch but it does not last as long....A dirty pot cleaned with WD-40 will be good for ~1 year before re-cleaning becomes needed where as the purpose made control cleaners tend to last ~5 years.
__________________
Tom C.

What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4

Reading between the scan lines since the mid 2000's.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:26 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
ęCopyright 2012 VideoKarma.org, All rights reserved.