|
I checked the safety caps and they're all in the circuit, they're distributed around the horizontal/HV subchassis and a bad connection would result in other issues. I've replaced almost all of the electrolytic caps in the whole set except for a few that are on the chassis and those test ok in circuit. I don't normally do shotgun re-capping but I was running out of ideas. I wondered if there was a damper resistor somewhere that had opened but I can't see anything on the schematic, I don't see any components on the yoke. I'll keep looking.
|
05-08-2024, 12:25 AM
Hybrid Mode
