Potential new project! Color Admiral!

[zeno]

Yeah, the tuner was very dirty, it was a bitch to get out because of the silly front screw in system they use that you have some odd key to unscrew. >>>>

The screws with 2 holes come out with long needle noses. They also
used 2 sizes of inside out nuts. I saw everyone fighting them so called
Maggy FS to get part ##'s & ordered 2 sets. I told the techs if they lost them they will build stands for 60 days

BTW many sets had a 'lytic on the conv PCB, causes bad V lin. IIRC
this had it ?

Zeno

[LukeSimon]

Originally Posted by zeno

Yeah, the tuner was very dirty, it was a bitch to get out because of the silly front screw in system they use that you have some odd key to unscrew. >>>>

The screws with 2 holes come out with long needle noses. They also
used 2 sizes of inside out nuts. I saw everyone fighting them so called
Maggy FS to get part ##'s & ordered 2 sets. I told the techs if they lost them they will build stands for 60 days

BTW many sets had a 'lytic on the conv PCB, causes bad V lin. IIRC
this had it ?

Zeno

It has two lytics on the convergence PCB. They tested bad on my T931, and so I replaced them with 105c lytics.