#16
|
||||
|
||||
This is an old thread which never really received an answer and now I am also in need of the information. Thought I'd resurrect this one rather than start another.
I came into possession of an RCA 10J106A Test Jig which is missing the 4' long adapter cables for Yoke and Kine. I believe these are cables with molex connectors on one end and octal / CRT connectors on the other end. Any jig owners with cables willing to ohm theirs out and supply the pin out information so I can make them up? Thanks
__________________
Tim |
#17
|
||||
|
||||
Quote:
The molex-molex cables are easy to make, but not with the different wire colors of the originals. There are two up on eBay right now: http://www.ebay.com/itm/2-Vintage-RC...YAAOxyZzlTc~hI No affiliation. You'd still need the pigtails as in post 9, or the pinouts. RCA made a manual with the pinouts, but they are hard to find. "Furnished with the 10J106 test jig is a complete cross -reference handbook which explains use of the instrument with almost all television receivers sold by the leading TV manufacturers. $339.95. -RCA Distributors and Special Products Div., Bldg. 206 -2, Cherry Hilo Offices, Camden, NJ 08101." IIRC, someone had one for sale with a jig back when I first joined AK/VK. Dunno who it was, but maybe a regular bought it and has the jig manual. Edit: Vintage Manuals has a 10J106 manual: http://www.vintagemanuals.com/manual/RCA/10J106%2C+107 Dunno if it is the detailed (binder) or the simplified manual (paperback, same size as a typical magazine...) Ask before you leap - the binder is what you need for pinouts. Cheers,
__________________
Brian USN RET (Avionics / Cal) CET- Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! Last edited by Findm-Keepm; 09-27-2016 at 12:45 PM. |
#18
|
||||
|
||||
If anyone gets the pinouts manual, I could use a copy.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
#19
|
||||
|
||||
Brian:
Thanks very much for the response. I'll look into the manual. Tom: I'll keep you in mind.
__________________
Tim |
Thread Tools | |
Display Modes | |
|
|