Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-07-2013, 07:54 AM
DavidGoncalv's Avatar
DavidGoncalv DavidGoncalv is offline
VideoKarma Member
 
Join Date: Mar 2009
Location: Lexington, MA
Posts: 76
Sencore CR70 Emission Function

I just got a CR70 last night, and was testing it out on a 5AXP4 I also received last night. Except for some confusion with the book settings vs. Universal Adapter settings, it tested fine.

However, I found that the Emission test result is dependent on the setting of the CUTOFF control. If it is turned all the way down the result is poor, and if turned all the way up the result is very good. The operating manual intimates that the EMISSION test automatically sets both grids to the conditions to perform the test. Certainly the manual makes no note about the cutoff setting having to be set to perform the EMISSION test.

Might there be an issue with my CR70?
Reply With Quote
  #2  
Old 08-07-2013, 03:12 PM
bandersen's Avatar
bandersen bandersen is offline
RCA 741PCS
 
Join Date: Mar 2009
Location: Chicago, IL
Posts: 8,085
With the function set to cutoff, position the cutoff control so the meter needle is inside the black "cutoff" box. Then do the emission test.
__________________
Here are my Vintage Radio & TV YouTube Channel and Photo Gallery
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:24 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.