| Magnavox300 |
08-10-2015 07:57 AM |
Quote:
Originally Posted by bandersen
(Post 3140383)
Just to be clear - C1 is the cathode bypass cap. It connects to the cathode on the vertical output tube.
The cap that went bad was C2-B which combined with C4 filters ripple out of the boost voltage.
|
Okay, so then I did replace the cathode bypass cap username1 originally suggested...
I did see it was the only cap coming off the vertical tube, and even though it tested well, I did replace it... thats when I noticed the burnt mark on the C2-B cap since it was right underneath C1. |
