Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Early B&W and Projection TV (http://www.videokarma.org/forumdisplay.php?f=19)
-   -   Free TV Sets Available at the Museum (http://www.videokarma.org/showthread.php?t=274175)

WISCOJIM 07-21-2021 12:54 PM

3 Attachment(s)
Quote:

Originally Posted by dieseljeep (Post 3235284)
The last 30" model they made was built to use up the last of the cabinets and CRT's. It had a single chassis that looked like one used in a 21" model.
It was sold to John Folsum, the collector in Florida.
He thought it was a Frankenset, but I replied that it was original because of the tube location diagram matched the chassis.
Naturally, the CRT was a rebuilt and weak, with a britener.
He probably still has it to this day.

That was the model RA-119B. Super, super rare. There were some
subtle cabinet differences besides the electronics within. I have
both the DuMont RA-119A and RA-119B models. In these pictures,
the "B" model is on the left, the "A" on the right.

http://www.videokarma.org/attachment...1&d=1626889599

Crosley also produced a TV set using the 30BP4 CRT. (not mine)

http://www.videokarma.org/attachment...1&d=1626889688

http://www.videokarma.org/attachment...1&d=1626889773


.

kf4rca 07-21-2021 01:51 PM

4 Attachment(s)
Yes its still sitting in my kitchen.
What we need is another TV museum. Maybe one on the west coast.
On CRT_Test2 it does show that the emission is low. But its been off for quite a long time and it might come up after an hour or so.

dieseljeep 07-21-2021 01:54 PM

Quote:

Originally Posted by WISCOJIM (Post 3235286)
That was the model RA-119B. Super, super rare. There were some
subtle cabinet differences besides the electronics within. I have
both the DuMont RA-119A and RA-119B models. In these pictures,
the "B" model is on the left, the "A" on the right.

http://www.videokarma.org/attachment...1&d=1626889599

Crosley also produced a TV set using the 30BP4 CRT. (not mine)

http://www.videokarma.org/attachment...1&d=1626889688

http://www.videokarma.org/attachment...1&d=1626889773


.

The same guy that had the 30" Dumont, had a Crosley 30" set. He sold it to a tavern keeper as a novelty. He referred my name to the people that bought it.
It was a Frankenset! Marked on the back was a notice, "There is an Admiral chassis in this Crosley cabinet! Naturally, there was a britener on the rebuilt CRT.
The Admiral chassis came from one of the first 27" Admirals, CA 1953.

Yamamaya42 07-21-2021 01:56 PM

Quote:

Originally Posted by kf4rca (Post 3235290)
What we need is another TV museum. Maybe one on the west coast.

How about central Texas? Like say... the Austin area? :D :yes:

kf4rca 07-22-2021 09:36 AM

How about at your house?
The problem for museums is that they operate at a loss. Even the government ones.
If you could get your land and building free, you would still have to convince the local government for property tax exemption.
And then there's electric and gas (heat) bills you would have to deal with.

Electronic M 07-22-2021 02:28 PM

Quote:

Originally Posted by Yamamaya42 (Post 3235292)
How about central Texas? Like say... the Austin area? :D :yes:

Back in like 2018-2019 a fellow (IIRC he goes by telecrusier here on VK) put on a presentation about a museum of IIRC TV broadcast equipment he opened in an old car dealership in Texas. That and the Texas antique radio club are probably your best bet for local-ish

Yamamaya42 07-22-2021 02:43 PM

Quote:

Originally Posted by Electronic M (Post 3235308)
Back in like 2018-2019 a fellow (IIRC he goes by telecrusier here on VK) put on a presentation about a museum of IIRC TV broadcast equipment he opened in an old car dealership in Texas. That and the Texas antique radio club are probably your best bet for local-ish

The Texas Broadcast Museum, which is in Kilgore, TX , about 265 miles away ( 4+ hours there & back in good traffic), is something worth seeing yes, but not like ETF, which has tons of televisions, and auctions for one to get them, parts and so on, major difference T_T


EDIT,

for example.

If,,, IF the ETF was as close as Kilgore, TX, I would not hesitate to steal a pickup from someplace, an releave Steve of some of those free TVs he has to offer, no matter what condition, but as I mentioned, Hilliard, OH is a weeee bit too far for me. :I

kf4rca 07-23-2021 02:54 PM

So what are we going to do about all these antique sets? There are guys in CA. who are into antique cars etc. Shouldn't be too hard to find one whose into TV's There's Chuck Pharis. But I think he's loaded up.
http://www.pharis-video.com/
I sure hate to see them end up in a landfill.

Electronic M 07-23-2021 03:04 PM

There's a couple of sets at the museum that I have CRTs for(looks like the CRTs are bad in all the free sets), and happen to like a little, but right now I am already probably beyond capacity. I need to have some things work out so I can get my own house and some out buildings for storage so I can take advantage of the increasing number of situations like this.

kf4rca 07-24-2021 05:50 AM

A solution to the transportation problem...
 
is UShip.com. They even have a TV show about this called Shipping Wars on the Quest channel.
Its about private individuals who bid for shipping jobs all across America. Many of their items are much larger than an antique TV set.
Just an idea.

Tom Albrecht 07-26-2021 01:37 PM

Did anyone take the Royal Sovereign, or is that still looking for a home?

kf4rca 07-30-2021 06:20 AM

I am having trouble with the private messaging on this forum.
Well, so far, no.
There is a guy who is coming up from Augusta GA. to check the CRT but he hasn't arrived yet.
He said he was going to have to make space in his storage rental. He has another chassis with the coil in it.
I think he is on this board.

Tom Albrecht 07-30-2021 10:37 AM

Keep us up to date on what happens. If no one takes it, I might be interested, but only if the CRT is good after a "cook-in." I have a suitable HV coil that I think I can make work for it. Cabinet would have to be free of any wood or veneer damage. It would be very expensive and somewhat risky to ship out here, but I'm willing to look into it.


All times are GMT -5. The time now is 06:55 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.