Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Early B&W and Projection TV (http://www.videokarma.org/forumdisplay.php?f=19)
-   -   Our current projects (http://www.videokarma.org/showthread.php?t=2365)

Eric H 10-29-2003 12:10 AM

1 Attachment(s)
Here's the 5 25Z6 rectifier tubes.

Eric H 10-29-2003 12:11 AM

1 Attachment(s)
and look at all the cans I get to restuff! Fortunantly most of them have paper covers and one section so those will be a breeze!

Eric H 10-29-2003 12:13 AM

1 Attachment(s)
The original Emerson jug still checks good

Eric H 10-29-2003 12:16 AM

1 Attachment(s)
The chassis was filthy! Worse, it has a lot of that greenish film that I have been told is Cadmium Oxide, highly toxic and carcinogenic!!

I found it comes off easily using Tub & Tile cleaner (basically Muratic Acid) this also takes the chassis down to the bare steel but since the Cadmium plating is shot already that doesn't really matter.

ChuckA 02-13-2004 07:07 PM

1 Attachment(s)
Back in May of 2003 I posted a picture in this thread of my "project" TRK-12. Well 10 months at the restorers and more money than I care to think about I have it back home again. I think it was well worth the wait.

Over the past 10 months I have been able to acquire all the missing parts, the only thing left is to have the radio push buttons made.


Chuck

Eric H 02-13-2004 10:12 PM

Beautiful!
 
Wow Chuck, that looks beautiful!

Eric H 02-13-2004 10:17 PM

48 Emerson
 
Famous last words.

This set has been a nightmare to recap!
It's finally working halfway decent though the horizontal is a little twitchy and on the edge.

It wouldn't tune anything at first, found out the fiber shaft that runs through the tuner had broken off right behind the front shaft. Got it on channel 3 and now it's working.


Quote:

Originally posted by Eric H
and look at all the cans I get to restuff! Fortunantly most of them have paper covers and one section so those will be a breeze!

Morden2004 02-14-2004 06:40 AM

Well, TV & tube guys, I have a question.

In several posts you guys mention 'washing down the chassis'.

Exactly how do you do this and what liquids do you use?

How long do you dry it out?

Precautions?

Etc.?


I hope this hasn't been answered before at length - if so just point me in the right direction and I'll go away (and read) :D

Thanks in advance,

Paul

Charlie 02-15-2004 08:08 PM

Cleaning
 
Paul,

This link should give you a good idea of how to go about cleaning the chassis, and many other pointers as well. Good luck.

http://www.earlytelevision.org/restorationadvice.html

ChuckA 02-18-2004 04:26 PM

1 Attachment(s)
Just thought I'd show off the TRK-12 in operation.

Chuck

domfjbrown 02-19-2004 07:17 AM

Chuck - that's amazing :) I've wanted a MIL set since I saw one in Exeter's museam in 1982 (I don't think this one works since BBC don't have 400 lines transmissions any more :))

It amazes me how something made 60-odd years ago can look that good and work that well, when things like my sister's old 1984 PYE b&w are long dead....

Jeffhs 02-19-2004 12:16 PM

Was browsing this thread and saw a couple more of the Zenith TVs I like so much. Glad to see you guys are getting your sets working as they did when they were new. I had a basement full of sets like that (of all makes) back in the late '60s-early '70s, a good many of which were Zeniths. My pride and joy was a 23" Zenith console which was missing every tube but the HV rectifier and CRT when I got it (rescued the set from a trash pile). Took me the better part of a year to retube it, but it was well worth it as it worked, and well (very well for a set made just six years before I got it), as soon as I turned it on after putting the last tube in. I think it's true what has been said about older sets being put out just because the owners replaced them with newer models. There was absolutely nothing wrong with that Zenith 23" set of mine, except that the tubes were missing.

I've seen Zenith TVs with Compactrons as well in the 30-odd years I've been experimenting with electronics. In the late '70s I had a Zenith 19" Space Command 300 portable which worked well as far as the TV itself was concerned, but I never did get the remote working as the hand unit was missing. That set, however, had several Compactron tubes--the horizontal output tube and, IIRC, the AGC keyer (the latter being combined with a couple other tubes). The vertical oscillator/output tube may have been a dual-function Compactron as well.

BTW: The Zenith console color set shown in one of the posts here may well be an all-channel version of the 29JC20 table model. The latter (and a related set, the 27KC20) were made in the early '60s, before UHF was a requirement in new sets, although in some TV markets with only UHF channels such as Youngstown, Ohio and areas with intermixed VHF and UHF network stations, the all-channel versions were available even before April 30, 1964 (the date the all-channel rules went into effect).


All times are GMT -5. The time now is 03:47 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.