Videokarma.org TV - Video - Vintage Television & Radio Forums

Page 3 of 3

Show 40 post(s) from this thread on one page

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)

- Early B&W and Projection TV (http://www.videokarma.org/forumdisplay.php?f=19)

- - RCA 621TS restoration -- in pictures (http://www.videokarma.org/showthread.php?t=254568)

Tom Albrecht

02-09-2017 01:44 AM

6 Attachment(s)

And yet some more...

Tom Albrecht

02-09-2017 01:50 AM

5 Attachment(s)

More pictures...

Tom Albrecht

02-09-2017 01:56 AM

2 Attachment(s)

The end... Sorry about all this clutter, but now all my previous posts in this thread have their pictures back in action. With them hosted here on this site, I suspect they will stay in place for a long time. :)

Crist Rigott

02-09-2017 09:53 AM

Much appreciated Tom. Now I need to go through this thread very carefully.

Crist Rigott

03-02-2017 09:06 AM

Went through this thread carefully and picked up on some things that will help with my restoration. Many thanks Tom.

broadcaster

03-02-2017 10:59 AM

FYI to 621 and 630 lovers. I have a NOS detent kit (RCA #71463), if the tuner detent is bad. $30 ppd

Crist Rigott

03-02-2017 05:01 PM

Tom,
What did you do for the safety caps. I know one goes from the "neutral" to ground. Did you put the other one downstream of the on-off switch? If so, how did you do it. Looking for ideas. Thanks.

Crist Rigott

03-02-2017 08:37 PM

Tom,
I figured out a decent way to install a safety cap after the on-off switch and before the transformer. All is well.

Tom Albrecht

03-03-2017 01:00 AM

Hi Crist,

I'd have to open mine up to see what I did, but most likely I simply replaced the existing line bypass cap(s) with safety caps and wired them the same as the originals.

M3-SRT8

03-04-2017 04:40 PM

Quote:

Originally Posted by Tom Albrecht (Post 3178252)

I like the fact that you DIDN'T restore the cabinet. :smoke:

All times are GMT -5. The time now is 04:42 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page