Yeah, I think I would run a thin line of clear super glue along the edges of the strips to keep what's there in place. It's turning out great!!

Thanks. I stabilized the strips with some glue and got it reinstalled. That just leaves the speaker grille in the top of the cabinet.
https://farm1.staticflickr.com/346/1...6e35e1ff_c.jpg

Almost finished... The I was getting ready to reinstalled the speaker board when I noticed it had delaminated badly and was rusty. So I took it apart, glued up the board, stripped and refinished the metal.

https://farm6.staticflickr.com/5750/...1f776b85_c.jpg

https://farm6.staticflickr.com/5826/...5955b04e_c.jpg

Not exactly a prefect match to the real wood, but neither was the original.
https://farm8.staticflickr.com/7112/...c09a4210_c.jpg

https://farm1.staticflickr.com/726/2...42cf8aea_c.jpg

Nice. That is going to be a very handsome tabletop.

Is that a Westinghouse-designed chassis or did it use a Philco-licensed chassis like my H-181?

Regards,

Phil Nelson
Phil's Old Radios
http://antiqueradio.org/index.html

Thanks. It's a Philco licensed chassis I believe. Very similar to a Philco 48-1001 except that it uses miniature 7 and 9 pin tubes rather than loktals and octals.