Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Early B&W and Projection TV (http://www.videokarma.org/forumdisplay.php?f=19)
-   -   Kaye Halbert (http://www.videokarma.org/showthread.php?t=244076)

Eric H 08-04-2009 11:25 PM

Kaye Halbert
 
http://cgi.ebay.com/Antique-TV-Kaye-...d=p3286.c0.m14

bandersen 08-04-2009 11:44 PM

I saw that set on craigslist - guess he didn't have any luck. Reminds me a lot of Sentinel sets from the same year.

Eric H 08-05-2009 12:04 AM

I think this is the earliest K-H set I've seen, most seem to be later 21" models

bandersen 08-05-2009 12:11 AM

Here's the Sentinel I was thinking of.

kx250rider 08-05-2009 08:56 AM

Nice set, and I've never had one of the open-face consoles like this one. It's the cheapie cabinet; chassis 242. 1951 model (early). The same chassis came in more deluxe cabinets with a 17" rectangular tube, and according to the brochure, a 24" round. Seller is also WAY WAY off on his facts. Kaye-Halbert never had a plant in Chicago. And to my knowledge, no distributor relations there either. That set was made at their second factory at 3555 Hayden Ave. in Culver City, CA.

If I were closer, I'd go for this one!!!!

Charles

John Marinello 08-05-2009 02:37 PM

What CRT does this set use? It looks like a 12" set from the front, from the back it looks like a metal cone... 16GP4? The set's a stones toss from me, might go have a looksee...

kx250rider 08-05-2009 04:27 PM

It's either a 16AP4, or it could also be a DuMont glass 15" tube. Those 15's are very rare, so it's probably a 16AP4. I'd have to look at the manual, but I don't think KH ever used a 16G.

Charles

John Marinello 08-05-2009 04:47 PM

Quote:

Originally Posted by kx250rider (Post 2931460)
It's either a 16AP4, or it could also be a DuMont glass 15" tube. Those 15's are very rare, so it's probably a 16AP4. I'd have to look at the manual, but I don't think KH ever used a 16G.

Charles

I don't think the cabinet is deep enough for a 16AP4 (22" long), seller says cabinet is only 21.5" deep. Screen at 13.5" is odd too.

Well, the TV may be closer to me than I thought. If the seller used his actual name, I may hafta go upwards of 2 BLOCKS outta my way...

John Marinello 08-05-2009 05:02 PM

I just called the seller, and yes, that's his real name: Lou Oates.
He said I could come by Saturday to look at the TV, but he wants me to bid on it first. So, I guess it's gonna cost me a buck to find out what CRT the set uses!

kx250rider 08-06-2009 08:26 AM

Quote:

Originally Posted by John Marinello (Post 2931548)
I just called the seller, and yes, that's his real name: Lou Oates.
He said I could come by Saturday to look at the TV, but he wants me to bid on it first. So, I guess it's gonna cost me a buck to find out what CRT the set uses!

Sams #139 shows these as available tubes for the open-face console with 242 chassis:

16AP4
16RP4 (rect or round???)
17BP4 (rect.)
19AP4
20DP4

Knowing that Kaye-Halbert was a semi-custom factory, you could also order alterations. I've seen a few with 27" tube, and heard of one with a 24" round tube (shown in the 1951-52 brochure, but not in the Sams for the same sets).

I have the factory engineering and service manuals on that set, so when I get back to LA, I'll look into it if this thread is still hot.


A note of interest: The Kaye-Halbert Cambridge in my avatar (left) has a 21" tube installed where a 20CP4 was originally. That set is a '52 with a 253 chassis (non-DX version).
Charles

John Marinello 08-09-2009 10:08 AM

Well, I went & had a quick looksee Saturday afternoon...
Nice older couple, wife said it belonged to her parents.
Best guess, I would have to say that the CRT is a 16GP4, it's just too short
(less thn 18") to be anything else. Schematic inside TV calls for a 16RP4, or equivalent. CRT has the plastic cone around it, but I can make out "Kaye Halbert" in big red letters on the cone. CRT is bad, as there is a crack at the 9 o'clock position. Very odd-sized bezel, as the seller is right, it only exposes 13.5" of the screen. I can just barely make out the flyback under the chassis, and it looks OK, but can't be sure. No 1B3, looks like a voltage doubler under there, as there are 2 small rectifier tubes that look like the ones the CTC series use for focus. The cabinet has a gouge in it on the left side, and can be seen in seller's photo, and the finish is flaking on both sides, down low. Sorry, but I forgot to get model numbers...

If anyone is interested in this set, go ahead & bid. You'll have to beat $5.01 though... Or, if you are a cheap-ass (like me) you can give me a buck for it if I win!

G.B. 09-21-2009 10:55 AM

Hope this post findes some othe Kaye Halbert stuff... G.B.

rld-tv01 09-21-2009 06:03 PM

This one sold over a while ago but I haven't seen another like it.

http://www.radiolaguy.com/KayeHalbert.htm

G.B. 03-01-2010 09:40 AM

Any one found any kaye Halbert TV lately ? Here is a Radio... Does anyone know when they was made. Some RCA & Zenith had AM FM in early 50's... FM was Mon then... http://shop.ebay.com/?_from=R40&_trk...w=kaye+halbert

kx250rider 03-01-2010 11:11 AM

That's a Japanese-built radio, which is one of several Japanese products made in the late 60s with the KH nameplate. The same radio was sold as Hallicrafters, McMurdo-Silver, Silver-Marshall, Marconi, and several other hijacked names. I have a small collection of Japanese Kaye-Halbert items, including a few versions of that radio with & without clock, and an AM-FM large portable transistor, and a variety of small pocket transistor sets. Also a transistorized 3 inch reel-reel tape recorder and a 45-rpm car phono.

Charles


All times are GMT -5. The time now is 02:08 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.