Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Early Color Television (http://www.videokarma.org/forumdisplay.php?f=36)
-   -   Varister wanted (http://www.videokarma.org/showthread.php?t=248955)

rcafan 09-29-2010 08:41 PM

Varister wanted
 
Has anybody got a varister for my CTC9, 70 ohm cold and 0.5 ohm
hot or a idea for replacing. (its R193 in the 117V input.
Thanks

Findm-Keepm 09-29-2010 10:32 PM

My Workman guide (sorry no date) says it's replaced by a Workman FR.49, a .49 ohm hot thermistor. No data in the guide, just the "hot" resistance.

Oneida and GC also marketed a line of thermistors, perhaps someone has one hiding somewhere.

Else, you may be able to find a GE Sensing Systems thermistor to work - Mouser sells these. A CL-80 comes close (47 ohms cold, .5 ohms at 100% rated current of 3A)

Or try and find the original RCA...


Cheers,

oldtvman 09-30-2010 06:49 AM

those are on sale on ebay under electronic parts

rcafan 09-30-2010 04:00 PM

Thermistor
 
Found it at Moyer in PA. Did not see right one on Ebay. Now, back to
work on the CTC9. The set is now working with good picture and
B/w tracking. Color has issue, Only red in picture shows up, Need
to get the scope out

Findm-Keepm 09-30-2010 07:29 PM

Just curious, did you find the exact RCA part or the Workman replacement?

Tried Moyers and eBay myself with no luck either!

Cheers,

rcafan 10-01-2010 12:26 PM

thermistor
 
Moyer says they have the RCAFR291 in stock , the replacement for
the original #107291. They took my $4.80, I hope I get it.

julianburke 10-03-2010 04:11 PM

It doesn't really matter what the "cold" resistance is as it should be high but linearly goes to almost zero ohms when hot. This is so the degausser can do its' thing before the tube lights up and then is effectively cut out of the circuit by shorting out the degaussing coil. I would say there are several varistors you could use with good results.

Findm-Keepm 10-03-2010 08:49 PM

Quote:

Originally Posted by rcafan (Post 2984007)
Moyer says they have the RCAFR291 in stock , the replacement for
the original #107291. They took my $4.80, I hope I get it.

Thanks for the info - I grabbed two Workman FR291's from a different vendor. Moyers are good folks, and I've bought stuff from them before, but I needed a cheater cord and grabbed some caps and thermistors ($3.30 each) while I was at it.


Cheers,

rcafan 10-04-2010 04:13 PM

The thermistor arrived today and I was very supprised that
it was the original RCA pack with the RCA number, I should
have ordered a couple

Findm-Keepm 10-08-2010 08:06 AM

Were they 107291 or 107191? I've found the 107191, and the vendor says they have plenty, not sure of price yet.

My FR291's arrived today - got a spankin new Belden Cheater cord too!

Cheers,

rcafan 10-08-2010 08:44 PM

Received 107291. original RCA part envelope


All times are GMT -5. The time now is 02:44 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.