Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Solid State CRT Televisions (http://www.videokarma.org/forumdisplay.php?f=184)
-   -   4 Pin AC Power cord ? (http://www.videokarma.org/showthread.php?t=257657)

Robb 03-16-2013 09:18 PM

4 Pin AC Power cord ?
 
1 Attachment(s)
Anyone know where I can get one of these 4 pin AC Power cords ?
Need it for an old 1978 Sanyo Portable TV (TV is Sears and Simpsons made by Sanyo in Japan Model # ctp 1401.)
The tv is like this


Heres the pins

http://i46.tinypic.com/33e51y8.jpg
http://i50.tinypic.com/ji2n84.jpg

mstaton 03-16-2013 10:09 PM

You might make this work, not exact but close


http://www.ebay.com/itm/SONY-4-PIN-A...item27d0db6894

Robb 03-16-2013 10:10 PM

Quote:

Originally Posted by mstaton (Post 3064515)
You might make this work, not exact but close


http://www.ebay.com/itm/SONY-4-PIN-A...item27d0db6894

damn, 54 bucks ! :sigh:

mstaton 03-16-2013 10:17 PM

did not look at the price but you can search for a Sony cord on the internet. Probably a better chance to find a Sony than Sanyo cord

zeno 03-17-2013 10:25 AM

Not so fast ! 2 pins are for AC , other 2 are +- 12v
Wrong cord & you may see fireworks.
A TV belching sparks & smoke is fun IF its what you want !

good luck

crtfool 03-17-2013 11:01 AM

That cable is 2 pins in with 4 pins out - so you have 2 pairs of ac going into the TV. Do a continuity test on the 4 pins on the TV - 1 set of 2 pins should be connected together, and the other set of 2 pins should also be connected together - now you can just connect a standard 2 pin AC cord to the proper pair and the TV will work properly.

Robb 03-17-2013 01:08 PM

Quote:

Originally Posted by zeno (Post 3064551)
Not so fast ! 2 pins are for AC , other 2 are +- 12v
Wrong cord & you may see fireworks.
A TV belching sparks & smoke is fun IF its what you want !

good luck

Good to know. Thanks.
I have no idea how to find this proper cord !

You think Sanyo would have old stock ? :scratch2:

dieseljeep 03-17-2013 02:11 PM

Quote:

Originally Posted by crtfool (Post 3064555)
That cable is 2 pins in with 4 pins out - so you have 2 pairs of ac going into the TV. Do a continuity test on the 4 pins on the TV - 1 set of 2 pins should be connected together, and the other set of 2 pins should also be connected together - now you can just connect a standard 2 pin AC cord to the proper pair and the TV will work properly.

First of all, the cord shown in post #1, is from an RCA or an RCA built GE.
The cord has four pins on the connector end. Two are used for 120 VAC. Another pair are used for 12 VDC. The DC cord is simular but has the cigarette lighter plug on it and using a different set of pins on the connector end.

crtfool 03-17-2013 02:16 PM

OK - very unusual that it is wired that way.

You should be able to identify the 2 pins that are for the AC circuit, and still use a standard 2 pin AC cord to power the TV.

Robb 03-19-2013 06:00 PM

Heres the pins

http://i46.tinypic.com/33e51y8.jpg
http://i50.tinypic.com/ji2n84.jpg

dieseljeep 03-19-2013 06:17 PM

Quote:

Originally Posted by Robb (Post 3064839)

Please include the model # of the set. The pictures in post #1 show a different set.
If we have the proper model number, maybe there is a Sams folder on it, so the pin out can be traced.

Robb 03-19-2013 06:20 PM

TV is Sears and Simpsons made by Sanyo in Japan Model #14062.

dieseljeep 03-20-2013 08:26 AM

Quote:

Originally Posted by Robb (Post 3064843)
TV is Sears and Simpsons made by Sanyo in Japan Model #14062.

I don't see anything listed in Sams under that number.
They never had much on Canadian products, unless it was an item that was sold here.
I don't know if Sears still has stores in Canada. They closed down a lot of stores in the states. :sigh:

Robb 03-20-2013 09:10 AM

Just look up 1978 sanyo portable tv. Im sure they use the same plugs.

Zenith26kc20 03-20-2013 10:12 AM

I can't really see from the pictures but some of these sets have a switch inside the receptacle to switch to 12 volts or AC. If it does, be careful as the wrong setting can also fry the set.


All times are GMT -5. The time now is 10:07 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.