Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Recorded Video (http://www.videokarma.org/forumdisplay.php?f=173)
-   -   Question on 1982 RCA Selectavison VGT-650 (http://www.videokarma.org/showthread.php?t=262349)

VintageLove 08-10-2014 11:51 PM

Question on 1982 RCA Selectavison VGT-650
 
3 Attachment(s)
Hello, fellow Videokarma members!

Need a little help here from those with some experience...

I have a 1982 RCA Selectavision VGT-650 VCR. I got it for free and decided to see if I could fix some issues with it, mostly cosmetic. The first thing I noticed is that some of the channel scanning dip switches were broken, there basically a little switch that slides into three positions. When I took it apart, to see if I could fix them, i noticed that someone had de-soldered some of them before at one point probably because they were broken too, and put a small piece of wire as a replacement? I wonder why they did this? instead of replacing the switch instead. I'm wondering by chance if anyone might have a spare board kicking around or perhaps the switches? I've included photos to show what I need.

[Figured I tact this on here, instead of making a new post.]

As you know these old VCR's have the infamous VFD Display that of course can become dimmer over time, on these VCR's you have a DIM/BRIGHTNESS Switch. I noticed on the clock display on mine that it seems to pulsating? I'm wonder if it is the result of a bad capacitor and is causing it to pulsate because it's not getting the right voltage?

I made a YouTube video to demonstrating the problem -> https://www.youtube.com/watch?v=5S5mE8mjXQc

Ed in Tx 08-11-2014 07:57 AM

1 Attachment(s)
Used to keep those band switches in stock, and replaced a bunch of those, back in the '80s. Easy to break. Someone probably jumpered the broken switch positions to make it work. You'll probably have to salvage some replacements from another unit. I think that's the same machine I had as Panason1c model, a PV-1780. Linear stereo only with Dolby noise reduction, no stereo tuner. NTSC stereo TV hadn't come out yet.

NoPegs 08-11-2014 12:09 PM

Heh, looking at your attachment I can't help laughing at "LED Clock" bit. Obviously a VFD unit. :yes:

Ed in Tx 08-11-2014 12:19 PM

Ha! Yes it was definitely a vacuum clock display. The channel indicator lights were LEDs.

Ed in Tx 08-11-2014 12:24 PM

Kinda funny how they touted this VCR not going obsolete any time soon in that ad, then VHS Hi-Fi came out about a year or two later, with MTS stereo TV in about 2 years too.


All times are GMT -5. The time now is 08:13 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.