Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)

- Early Color Television (http://www.videokarma.org/forumdisplay.php?f=36)

- - 21AXP22 gasket replacement? (http://www.videokarma.org/showthread.php?t=274040)

nasadowsk

05-22-2021 07:14 PM

21AXP22 gasket replacement?

Well, subject says it all. The one on mine is distorted and I’m wondering if any 4 or 5 owners have found a suitable replacement. This is the one up front by the glass, not the one back by the flange.

Thanks! :)

Electronic M

05-22-2021 09:10 PM

There's a slim chance I might have a spare. I bought an ex CTC-4 AXP that I know had the black flange gasket but I don't remember if it had the gray front gasket or not.

nasadowsk

05-23-2021 07:03 AM

Cool. I’m wondering if was a generic extrusion. Then we can all have a spare :)

Electronic M

05-23-2021 08:20 PM

2 Attachment(s)

Quote:

Originally Posted by nasadowsk (Post 3234029)

Cool. I’m wondering if was a generic extrusion. Then we can all have a spare :)

Unfortunately I don't have a spare front gasket (only the black side gasket do I have a spare for). But one of my CTC4s has the AXP out of it right now (the cabinet needs repairs) so all I can give you are pictures of the gasket.

IIRC the inside of the mask is ribbed and the ribs compress the gasket at regular intervals. If the only issue with the one in your set is those regular dimples from the mask I'd just keep using the one you have.

old_tv_nut

05-23-2021 10:42 PM

I didn't even remember the front gasket - I guess it usually stays in place when removing the tube? Anyway, sorry to say I don't have a spare. - Good luck.

All times are GMT -5. The time now is 05:29 AM.