Early color chassis on E-bay
 

A CTC-2B RCA color tv chassis has come up for bid. This is for the model: 21-CT-55 upright console produced in very late 1954 and 1955. The chassis is in Ca.

Item #2150337353

Shame it doesn't come in the original box. :(

Rob

No box, and the reserve is a little high. But if someone can pick it up locally and save the shipping; the parts might come in handy. You don't hear much about the 21-CT-55's Kind of the forgotten set. I can't remember, does anyone own one of these ::dunno:

I think quite a few 21-CT-55's went into color monitor service in the early color studios/control rooms. I've never seen one in person.

Rob

You're right Rob. I remember a great front cover from a 1955 issue of Radio & Television News had a couple of 21CT55's in the control room of the then new NBC Burbank color studios. I have the magazine someplace around here. Also, I see that John Folsom may own one of these sets. It's posted on Steve McVoy's site under early color tv.

Steve:

I think that this is the magazine cover to which you are referring. Too bad that chassis doesn't include the yoke and convergence assemblies.

Steve K

Thanks Steve,:p:
That's Exactly the cover.

Hi Steve. I was talking to Tom H. at the ETF Convention, and he said he picked up a CTC-2N attached to a 21AXP. I said surely it must be a 5N, But he said it was definitely a 2 and not a 5. After describing the chassis to several attendees, they concurred with me that it had to be a 21-CT-55. Got it for a song, and says it's in great shape! Phil

Reeferman,

Looks like you've been spending time in the AK archives. Good to see those 21-CT-55's are still showing up. Thanks for the update.

-Steve D.

I hope no one thinks that just because I threw in a bid that I have a place to put it either!!!! : ) Frenchy
1966 RCA ctc16
1956 RCA CTC5
Zenith Porthole 16"
Zenith Porthole 12" table model
Packard Bell 12"
Hoffman 10" Easyview table model
And every other square inch of my house inhabited by restored pinball machines and a Victrola : ()