|
Having followed the advice, I put the cage back on the set without the screws and working fine. It started acting up after the second srew was put back in place. Only by moving the cage slightly, the focus started acting up and the screen would go out of focus. The culprit is now replaced and the set is OK. The old focus cable looks perfectly fine. I guess it became porous over the years. The eff coil was replaced and the current is now 190 mA. It takes 2-3 minutes for the color to sync when powered up with 110v. All tubes checked OK. When the set is poweredup with 120, the color appears immediately. could live with it that way if it does not degrade any further.
Thanks for all your tips.
|