|
Ts18
Hello Eric,
Well I've replaced all of the HV caps and all but 2 in the audio section and have also replaced resistors. My HV probe still shows less than 1kv although since replacing the last few caps I can get a little light on the crt (very little). The hv probe is a Pomona and is good. I can draw maybe an 1/8th inch spark from the plate of the 1b3 but that's all. One thing I've noticed is that I can't use 1b3/1g3 tubes in it as the tv seems to sqegg no matter where I put the feedback spring.
Is that telling me something? Any ideas?
Rich
|