|
After working for about 2 days after I resoldered the crystal, I got the white and green picture again tonight. So I pulled the chassis and resoldered it again. I also did try a 24pf cap to ground (the closest I had to 10pf), but with the cap it had no color sync at all, then after I removed it, the re-resoldering of the crystal must have done something, as the color worked again. If the color doesn't stay this time I'll try picking up a 10pf cap. The side of the crystal that hooks to pin 3 of the 6GH8 already has a 82pf cap to ground, but it was only the other side of the crystal going to pin 1 of the 6GH8 to which hooking the scope probe fixed the color.
|