Now that the Philco is pretty much done I thought I'd start on something else.
I always liked the looks of this Emerson so I figured I'd start on it tonight.
This set is small but substantial, it weighs in at 66 lbs, and a lot of it is the transformer!
The CRT is in fair shape, it makes it to the lower end of the good range which is plenty for a 10BP4.
Someone had been in here before, probably in the 1950's or early 60's because there were some Sprague Black Beauties that had been installed and a rather sloppy job was done of it. (3rd pic) Don't bother trimming the leads and installing them properly, just tack them on anywhere
, (note the one old cap still in place with one end cut!)