|
Chad,
Ordinarily I would tend to agree with you on the CRT. However, this crt is a reman tube with roughly 20 or so hours on it. Additionally, the emissions are solid on all three guns.
Even besides all that, I had talked about putting a CTC-38 chassis on the tube/yoke and trying it out in my previous thread. When I had the CTC-38 attached to the crt, the color was perfect as was red raster. I stuck the CTC-38 in the cabinet just to verify the yoke, convergence and crt were working correctly.
So I know the problem is in the CTC-21 chassis at this point.
But certainly checking the voltages is one of the first places to begin and I appreciate your help.
I was kinda hoping to save some uneccessary troubleshooting if some of the much more experienced techs out there had any short cut solutions or recalled any trouble spots that I should go for first. It would be nice to know all the circuits are working properly prior to recapping.
|