|
The EICO user group on Yahoo has the files and a bunch of good posts from Eico nuts.
"Can you wash them and dry them in the sun to clean dust/dirt off"
hmmmm... never thought about it - never tried it - I generally start with a paint brush some compressed air and go from there.
Most were kits, some were factory wired - they generally had an EICO QC stamp on the chassis if they were factory wired.
The general wisdom is not to fire it up without a variac and a check up.
The unofficial Eico site is off the air but I have all the files if you need something that's not on the Yahoo groups files.
|